Analytical solutions for Euler–Bernoulli beam on visco‐elastic foundation subjected to moving load

Analytical solutions for the steady‐state response of an infinite beam resting on a visco‐elastic foundation and subjected to a concentrated load moving with a constant velocity are developed in this paper. The beam responses investigated are deflection, bending moment, shear force and contact pressure. The mechanical resistance of the foundation is modeled using two parameters k_s and t_s — k_s accounts for soil resistance due to compressive strains in the soil and t_s accounts for the resistance due to shear strains. Since this model represents the ground behavior more accurately than the Winkler spring model, the developed solutions produce beam responses that are closer to reality than those obtained using the existing solutions for Winkler model. The dynamic beam responses depend on the damping present in the system and on the velocity of the moving load. Based on the study, dynamic amplification curves are developed for beam deflection. Such amplification curves for deflection, bending moment, shear force and contact pressure can be developed for any beam‐foundation system and can be used in design. Copyright © 2012 John Wiley & Sons, Ltd.     

Correlation between point load index and compressive strength for quartzite rocks

Summary The relationship of the point load test with uniaxial compressive strength was examined using quartzite rocks to substantiate the existing correlations.     

求解非线性有限元方程的弧长法及在工程稳定分析中的应用

本文讨论了求解非线性有限元方程弧长法的基本原理及具体实施,并应用于压杆及滑块的稳定性分析。由于弧长法具有确定并通过结构临界应力状态的临界荷载值,因此可以应用于工程稳定性分析。算例表明,弧长法确定的临界荷载值是令人满意的。     

DPP100－3型钻机改型设计中的几个问题

讨论了ＤＰＰ１００－３型钻机在改型设计中动力匹配，改换汽车底盘的轴荷分配，改装部分的传动装置布置等，主要以选用ＣＡ１４１Ｓ型汽车底盘的改型设计为例进行说明。     

华南晚三叠世前陆盆地的成因地层格架及演化历史

在详细研究盆地中各类沉积体系的沉积构成和演化过程的基础上,通过成因地层对比,建立了残留海湾—前陆盆地的成因地层格架。根据沉积体系的时空组合及其与相关等时性地层面的配置关系,划分出了3个构造沉积幕,每个构造沉积幕都是盆地基底荷载挠曲变形至弹性回跳过程的沉积响应。海平面升降变化和盆内软沉积物压实沉降虽然不能触发和主控盆地基底的构造挠曲旋回,但对各构造沉积幕的地层构型和持续时间有重要影响。盆地基底荷载挠曲变形与海平面升降或压实沉降过程以不同方式叠加,产生各种类型的构造沉积幕,与前陆盆地共生的还有后陆盆地和残留的弧后盆地。     

沙漠化评价基本理论初探

沙漠化评价的原则、内容和方法紧密联系。沙漠化研究内容决定其评价内容。沙漠化地图的合适信息负载量，决定各种比例尺的沙漠化评价指征的详细程度，也决定沙漠化分级数与分类数。分级数的下限是沙漠化允许值。     

Mine ventilation planning in the 1980s

Conclusions In this paper, the author has attempted to trace the development of mine ventilation planning from the traditional, manual and largely empirical methods of the past to the numerate computer-based techniques of the 1980s.The computer revolution has changed the face of many engineering disciplines, not least mine environmental engineering. Nevertheless, the mining industries of the world have not all been equally progressive in adapting to the flexibility, power and practical utilization of the new methodologies. It is, for example, incongruous that current textbooks on mine ventilation separate completely the topics of network analysis and ventilation planning with very little cross-referencing. Many of the current generation of mine ventilation engineers recognize the need to know about computers but find difficulty in translating this into their daily work. The growing availability of self-teaching, friendly software for personal microcomputers, coupled with interactive graphics, will assist greatly in promoting uncomplicated but powerful usage of computers.Young engineers now graduating from universities and colleges have been brought up in a computer-oriented environment and are competent in interacting with these machines. Indeed, they wonder how the job was ever done without magnetic data bases and high-speed computation aid.     

Hydraulics of runoff and loess loam deposition

On many more or less loamy soils, rill erosion is reported to start on slopes that are equal to or steeper than 2–3°; critical Froude numbers for the start of rill wash on these slopes vary between 2·0 and 3·0. This explains why colluvial deposition often occurs on slopes below 2–3°, when water spreads out at the downslope extremities of the rills. The critical hydraulic conditions for loess loam deposition were tested in the laboratory for slopes of 0·5° and 2°, applying unit-discharges (q) up to 10 cm²/s. It appeared from these experiments that for afterflow, without raindrop impact, deposition starts for critical load concentrations (c_cr) varying between several g/1 and about 60 g/l. Under rain c_cr amounts to a minimum value of 100–125 g/l and it increases when the runoff film becomes thinner. Nevertheless, deposition in pluvial runoff is also possible, as was the case during the Weichselian, according to data from quarries in Belgium and in The Netherlands. A modified Kalinske equation is proposed for c_cr prediction, with the introduction of a typical empirical coefficient C_r and considering such factors as shear stress and mean particle size. Massive sedimentation may occur when it stops raining and afterflow starts, since c_cr values are then much lower. It is shown from the Shields' diagram that loamy suspensions are more sensitive to sedimentation than sands in clear water.     

平面滑动标准化法在区域水化资料整理中的应用

平面滑动标准化法是应用电子计算机处理(以下简体电算)大量区域水化资料的一种方法。它能够较好地反映水中各种元素的区域分布和圈定高背景区,准确地确定各类水异常的规模、强度和空间展布,有效地检出大量数据中的微弱信息,比传统整理方法具有显著的优越性。本文以65地区的应用效果加以说明。     

单桩竖向抗压极限荷载的极限状态与确定

本文通过对桩的荷载传递和沉降分析，研判了桩的极限载荷的极限状态，并结合工程实例予以说明。根据文献提供的资料，建议桩的极限荷载宜采用Ｓ－ｌｏｇＰ法确定。